Call a Specialist Today! 020 8138 5773

Cambium Networks ePMP 3000 Access Point
The Third Generation Access Point (AP) That Carries On The Interference Tolerance Mechanisms From ePMP 2000 But Adds The Power of Multi-User MIMO (MU-MIMO)


Cambium Networks ePMP 3000

Cambium Networks Products
ePMP 3000 Access Point
ePMP 3000 5 GHz Access Point Radio
#C050910A203A
Our Price: £956.92
Inc. VAT: £1,148.30

Click here to jump to more pricing!

Please Note: All prices displayed are Ex-VAT. 20% VAT is added during the checkout process.


Overview:

Cambium Networks' ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price.

The ePMP 3000™ is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-User MIMO (MU-MIMO).

The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time.

Key Advantage:

  • Frequency Reuse: Supports GPS synchronization and SM Transmit power control to allow for frequency re-use.
  • Unmatched Performance and Scalability: With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active subscriber modules can be served without performance degradation.
  • Industry-Leading Interference Tolerance: The intelligent filtering capability on the receive side makes ePMP 3000 immune to the effects of strong off-channel interferers and on the transmit side serves to reduce off-channel noise for better radio co-location.
  • Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the sector capacity by serving two MIMO users at the same time.

Key Specifications:

  • MU-MIMO support with peak throughput of 1.2 Gbps
  • 256QAM-5/6, 80 MHz support
  • Supports a wide frequency range: 4910 - 5970 MHz
  • 802.3at compliant 100/1000BaseT interface
  • Frequency re-use with GPS sync, interference mitigation with beam steering antenna and dynamic filtering

Specifications:


ePMP 3000 Access Point Specifications
Spectrum
Channel Spacing Configurable on 5 MHz increments
Frequency Range 4910 - 5980 MHz (exact frequencies as allowed by local regulations)
Channel Width 20 | 40 | 80 MHz
Interface
MAC (Media Access Control) Layer Cambium Proprietary
Physical Layer 4X4 MUMIMO/OFDM
Ethernet Interface 100/1000BaseT, rate auto negotiated, 802.3at compliant & Aux SFP port
Powering Methods Supports 56 V PoE (included), standard 802.3at PoE Supply, or CMM5 with 56 V and 5 pin to 7 pin cross over cable adapter
Protocols Used IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
Network Management HTTPs, SNMPv2c, SSH
VLAN 802.1Q with 802.1p priority
Performance
Subscribers per Sector Up to 120
ARQ Yes
Nominal Receive Sensitivity (w/FEC) @20MHz Channel MCS 0 , -92 MCS 8 supported by Wi-Fi -68
Nominal Receive Sensitivity (w/FEC) @40MHz Channel MCS0, -89 MCS9, -64
Nominal Receive Sensitivity (w/FEC) @80MHz Channel MCS0, -86, MCS9 - 61
Modulation Levels (Adaptive) MCS0 (BPSK) to MCS 9 (256 QAM 5/6)
GPS Synchronization Yes, via Internal GPS or Cambium Sync (Internal GPS receiver also contains a patch antenna and can be used without the external puck antenna)
Quality of Service Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority, MIR/CIR support*
DSO Dynamic Spectrum Optimization. Ability to change channels based on interference detection on current channel
Fast DFS Change to alternate radar free channel with background availability check
Link Budget
Antenna Sector Antenna (C050910D301A ) Available
Transmit Power Range 0 to +32 dBm (combined, to regional EIRP limit) (2 dB interval)
Physical
Sector Antenna Connection 4 x 50 ohm, RP (Reverse Polarity) SMA
Beamforming Antenna Connection 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)
GPS Antenna Connection 1 x 50 ohm, RP (Reverse Polarity) SMA
Surge Suppression 1 Joule Integrated. C000000L033A - 56V Gigabit surge suppressor recommended for optimal surge protection
Environmental IP55
Temperature -30°C to +55°C (-22°F to +131°F)
Power Consumption 25 W Mazimum1
Input Voltage 44 V to 59V
Weight 0.7 kg (1.5 lbs) without brackets
Dimensions (L x W x H) 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets
Security
Encryption 128 bit AES (CCMP mode)
Certifications
FCCID Z8H-89FT0024
Industry Canada 109W-0024
CE EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz)

1 The maximum power consumption of the Access Point is the same regardless of wheter the optional Smart Beamforming Antenna is equipped or not. This is because the Beamforming Antenna draws its power during the uplink cycle when the Access Point power consumption is not at its maximum.

Documentation:

Download the Cambium Networks ePMP 3000 Access Point Datasheet (.PDF)

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.

Pricing Notes:

Cambium Networks Products
ePMP 3000 Access Point
ePMP 3000 5 GHz Access Point Radio
#C050910A203A
Our Price: £956.92
Inc. VAT: £1,148.30